iWash Pump Stand

iWashThe iWASH pump stand is the heart of the self serve carwash because it brings together all other equipment required (Water Softner, Reverse Osmosis, Hot Water System and Compressor) to deliver products into the Carwash bay. As the user-friendly functions are selected in the Carwash bay through the bay controller, the pump stand responds and delivers the selected product.

Some products are best applied to the vehicle under low pressure, while others require high pressure application, and it is the pump stand that controls this. The pump stand frame is constructed from stainless steel tubing and the unit is pre-wired and pre-plumbed. Housed within the frame are a host of components and troubleshooting features that deliver the optimum wash for your customers and, importantly, the smooth operation of your self serve bays at all times.

 

       
       

IWash featuresiWASH Pump Stand Features

  • Available for 2 - 8 bays
  • One high pressure Cat310S pump with stainless steel sleeve, for each bay
  • Electric, low-pressure pumps, complete with low-water cut off, to supply Presoak, Tyre cleaner / Engine degreaser, and Clear Coat Protectant to all bays 4+ Bays. Flojet pumps are used on pump stands 3 or less self serve bays and Tri Colour Foam Brush.
  • Stainless steel chemical mixing tanks fitted with hydrominder valves to provide an accurate automatic mixture of each product for delivery to the bays.
  • Three phase power loss protection
  • Low water pressure protection which pauses the timers in the bays to prevent the pumps from running dry. Once pressure is returned to normal levels, the bays continue to operate.
  • Hot high-pressure soap and high-pressure wax
  • Low voltage control wiring (24v) to prevent any risk of electrocution
  • Built in time clock to control operating hours
  • Pulsation dampner on each high pressure bay
  • Stainless steel rebuildable solenoids
  • 4KW electric motors standard

       

iWashiWASH Pump Stand Advanced Features

  • Tri colour foam brush
  • An optional Bonus Time controller which allows you to set operating times that provide the customer with more time for their money
  • Main isolation switch to control complete pump stand
  • External isolator key switches per bay, and stop / start switches
  • All stainless steel water manifolds
  • Cog belt drive Back pressure relief valves on all low pressure lines

       

iWASH Touch Select Bay Controller

The touch select bay controller is the interface between the pump stand and the self serve bay. It allows your customer to use $1/$2 coins as well as tokens through the MicrocoinŽ QL coin acceptor. With 10 position wash functions and a count down timer display with buzzer. The bay controller comes with a range of owner and customer features, including resettable pin numbers for car and coin count as well as bay wash down time. Time is settable in 5 second increments, with a coins to start function as well, as alert on time left.

       

iVac

 

 

iVAC Features

The iVAC has a stainless steel construction, complete with smooth bore vacuum hose, swivel cuff and nozzle. It uses 2 quiet Lamb motors and the dome is fitted with acoustic foam to reduce noise. It has 4 easy to wash filter bags and an easy to empty rubber waste basket. It has a programmable timer that can set operating hours as well as bonus time if required. Having a main isolator and individual motor protection it meets all Australian standards.

       

Contact Washworkz